marking gauge (beechwood) (1258)
For the marking of wood prior to sawing, chiselling or cutting. Radiussed bottom edge to slide easily on the wood being marked. A thumb screw adjusts the stem. Made from beechwood.
| code | patt | size | box qty | |
|---|---|---|---|---|
| 295800 | 1258 | - | 6 | |
combined mortice & marking gauge (beechwood) (1876)
A combination mortice and marking gauge with a double pin for marking out mortices on the other. An essential tool for all woodworkers. A thumbscrew adjusts the stem and solid brass slide.
| code | patt | size | box qty | |
|---|---|---|---|---|
| 297600 | 1876 | - | 6 | |
combined mortice & marking gauge (rosewood) (1877)
A gauge manufactured to the same standards as pattern 1876, but fitted with brass adjustments.
| code | patt | size | box qty | |
|---|---|---|---|---|
| 297700 | 1877 | - | 6 | |
carpenters sliding bevel (rosewood) (1253)
Used for checking angles, marking joints or marking across boards. The bevel stock is made from rosewood and the ends are protected by brass fittings. The metal blade is parallel and held with a wing nut for easy adjustment. The chemically blued blade helps prevent corrosion.
| code | patt | size | box qty | |
|---|---|---|---|---|
| 295307 | 1253 | 71/2" | 190mm | 6 |
| 295309 | 1253 | 9" | 228mm | 6 |
| 295310 | 1253 | 101/2" | 267mm | 6 |
carpenters sliding bevel (beechwood) (1254)
A cheaper version of the 1253, made from beechwood and with a screw rather than wingnut. The chemically blued blade helps prevent corrosion.
| code | patt | size | box qty | |
|---|---|---|---|---|
| 295407 | 1254 | 71/2" | 190mm | 6 |
| 295409 | 1254 | 9" | 228mm | 6 |
carpenters square (rosewood) (1248)
Used for marking right angles and checking for squareness. The rosewood stock is fixed to the steel by three brass rivets. The stock is fitted with a thick brass plate for protection and a longer life. The chemically blued blade helps prevent corrosion.
| code | patt | size | box qty | |
|---|---|---|---|---|
| 294806 | 1248 | 6" | 150mm | 6 |
| 294807 | 1248 | 71/2" | 190mm | 6 |
| 294809 | 1248 | 9" | 230mm | 6 |
| 294810 | 1248 | 101/2" | 265mm | 6 |
carpenters square (beechwood) (1249)
A similar square to Pattern 1248 but with a thinner brass plate and a beechwood stock. The chemically blued blade helps prevent corrosion.
| code | patt | size | box qty | |
|---|---|---|---|---|
| 294906 | 1249 | 6" | 150mm | 6 |
| 294909 | 1249 | 9" | 230mm | 6 |
block plane (220B)
Block Planes are generally used for end grain planing hence the lower angle of the blade (21°) or for small scale planing jobs. This plane can be used single handed. The base is machine ground for accuracy and has finger and thumb grooves in the sides for a positive grip.
| code | patt | size | box qty | |
|---|---|---|---|---|
| 432000 | 220B | 15/8" | 42mm | 1 |
| 992200 | 922 | 15/8" | 42mm | 6 |
| Spare blade for No 220B. | ||||
jack plane (5B)
The Footprint Jack Plane is for heavy material removal and squaring of rough timber prior to final finishing. The extra length ensures the plane does not follow contours and instead levels the wood being planed.
| code | patt | size | box qty | |
|---|---|---|---|---|
| 430500 | 5B | 2" | 50mm | 1 |
smooth plane (4B)
The most popular bench plane. As with all Footprint planes, the casting is machined and the base machine ground to provide complete accuracy. The frog contact points are also machined and the mouth is broached so that it is square to the sides.
| code | patt | size | box qty | |
|---|---|---|---|---|
| 430400 | 4B | 2" | 50mm | 1 |
| 994400 | 544 | 2" | 50mm | 6 |
| Spare Blades for the 4B and 5B Planes. | ||||